Featured: This GT40 Replica Was Built To Tear The California Desert A New One

This GT40 Replica Was Built To Tear The California Desert A New One

Ted Gushue By Ted Gushue
October 4, 2016
11 comments

Photography by Ted Gushue

While so many of us sit around and talk about all the toys we’re gonna buy or build or mess around with someday, some of us actually wake up early, go to bed late, and get it done. Eric Dean, proprietor of Rimrock Ranch is one of those guys. An ex-creative director, he focuses a lot of his energy into side projects that keep his hands busy. Building an RCR GT40 turned out to be the perfect project to scratch that itch.

Ted Gushue: Walk me through this beast of a GT40 that you’ve built.

Eric Dean: When I moved out to San Francisco, the first year and a half I lived in the city, I didn’t have any of my cars out here. I had one motorcycle that was my only mode of transportation, and I didn’t have any time because I was getting an agency off the ground. That was fine, but I needed to work on something. I like to have a physical project at all times. What I did for work was primarily digital and intangible, so I always wanted to have something to keep my mind and my hands busy that was a creative outlet beyond work.

I went home for a friend’s wedding in September of 2012, I think it was. I was storing my 911 at a friend’s house, and it was really close to Race Car Replicas (RCR) who built the chassis for my GT40. I just popped in there before I drove the car up to Traverse City Michigan, which is about a full day’s trip.

TG: Are they more of a kit manufacturer, or can you drive off the lot in a “brand new” GT40?

ED: No, not necessarily. I think they’ve done that for a few people, and I think they’ve done turn-key-minus projects. RCR is a lot more of a hands-on build than, say, I think a Superformance or a CAV or any of the other options. It required, in my opinion, you as a builder to invest a lot more in terms of time and fabrication, and that was appealing to me. I’d restored at this point three Formula cars, some of which were total basket cases, and restored my ’81 911 SC, and so I thought I was pretty well-equipped and I wanted a challenge.

Since most of my projects were track cars, I wanted to do something that I could eventually put on the street and, then, basically build my dream car.

I didn’t know how long it was going to take, but I was pretty ambitious, and I spent every evening and every weekend that I possibly could working on it. I thought it’d take me a year and a half…it took me about three years and I employed the services of a good friend of mine who’s just a genius engineer and fabricator. His name’s Dave Lyman and whenever I would get in over my head or it felt too daunting, he would help push me over that.

Really, there were a couple of times where I was just like, “Man, I’ve got to step away from this thing for a bit”. It helps when you have a friend that can keep you motivated and keep you accountable. I’d never had that problem before because every other car that I’d ever built had once been together, and this car never had. There were a lot of things that didn’t necessarily fit or hadn’t even been figured out.

TG: Tell me about some of the major decisions you made, the engine and transmission for example.

ED: It was important to me that it looked the par. That it looked authentic. It’s one of the most beautiful cars ever designed. I didn’t want to vary too far away from that. I was already starting with an RCR chassis, which is not at all the same as the original design.

TG: It’s an aluminum monocoque like you said.

ED: The original was steel tube semi-monocoque. Interestingly enough, Eric Broadly from Lola, who designed the GT40, wanted the car to be an all aluminum monocoque, which I think is really interesting because, obviously, that’s a superior race car technology. This car’s got CNC suspension components, so out of the gate isn’t going to be a nut-and-bolt like replica of anything. I wanted it to be a car that performed really well and looked the part.

In my mind, all that modern stuff aside, I was thinking of it in terms of if I was going racing in the mid-’60s, and I was a privateer how would I build that car. Obviously, some of that stuff isn’t available today, or it’s harder to find. I wanted a lot of the stuff to be fairly off-the-shelf. I wanted it to have a really solid power plant. I went with a 302 block, a 331 stroker motor from Keith Craft and it has gobs of power. It did 440 horsepower on the dyno. It’s a Porsche G50 transmission and it just works. That power-to-weight ratio is probably, I’m not a NASCAR guy, but it’s equal to what a NASCAR would be.

TG: How frequently are those two paired up, a stroker and a G50?

ED: I’m not really certain. It’s funny, I don’t spend a lot of time on forums and really know what other folks are doing. I built this car how I wanted to build it. Every time I would go onto a forum I would just fall down a wormhole, and I would second guess everything. I’d rather spend that time in the garage, and so Fran at RCR had mentioned it was a good solid reliable combination. I like the 302. It’s pretty bullet-proof. It’s a good sized package. It doesn’t weigh a lot.

TG: It just mated perfectly with the G50?

ED: Yeah. There’s an adapter plate. You flip the transmission upside down, put it together and it works right away.

TG: Very cool. What’s it like to drive?

ED: It’s fucking scary, in terms of overall acceleration it’s absolutely insane. I can’t drive anywhere near it’s potential, so I probably should have put a milder power plant in it, honestly, for how I drive it. I thought I would do more track time, but because my life is at Rimrock Ranch now I haven’t been able to do nearly as much as I wanted to. I think I would have tamed it down a bit, but it’s so planted that it can handle the power. It’s not squirrelly. I just feel like you can just keep giving it power and it will stick. It’s such a well-balanced car.

I remember the first time I drove it any distance at all, I did the Bohemian Run and Gwen, my girlfriend, was in the seat next to me and we were just tearing up a mountain.

I looked over to her and I was just like, “I built this car. It’s blowing my mind right now”. I was really proud. It just does everything well. It does everything it’s supposed to do, but I still treat it with a tremendous amount of respect because it’s scary-fast.

Join the Conversation
Related

Leave a Reply

11 Comments on "This GT40 Replica Was Built To Tear The California Desert A New One"

avatar
Photo and Image Files
 
 
 
Sort by:   newest | oldest | most voted
Fernando Bunster
Fernando Bunster

Eric, great job on the car. As the original importer of CAV cars in the US, I know the work and many hours you devoted.

I’m not sure if you’re aware that the original GT40s both the MK1 and MK2 were full steel monocoque chassis racers with a steel roof. But unlike yours, which appears to have a full roll cage, the original cars didn’t offer much in the way of rollover protection.

FYI; the CAV prototype with a tired Ford 302, easily achieved 185mph on a closed circuit in Cape Town. I sat in the passenger seat.

EricDean
EricDean

Thank you Fernando and thanks for reaching out. CAVs are very nice cars. I’ve had the opportunity to spend time around a few. That’s right. I think I referred to it as a semi-monocoque in the interview. I’m sure that was an exhilarating ride. Very cool. I’ve seen footage of an RCR GT40 roll several times at high speed when it went off track and the driver reportedly walked away ok. The car had the same cage configuration as mine.

Jonathan WC Mills
Jonathan WC Mills

As someone who knows Eric but hasn’t been to Rimrock (yet!) I can’t get enough of his builder/design aesthetic. He’s the kind of car guy I aspire to be and this build is absolutely amazing. Bravo. The interview is too short Ted!

EricDean
EricDean

Very kind words Jonathan. Thank you very much. We’re going to have to work on getting you to Rimrock as soon as possible.

Amir Kakhsaz
Amir Kakhsaz

I follow this dude on Instagram. He’s got cool style and I love the “period-looking” livery without actually being some redundant homage to the same Gulf, Sunoco, etc. that’s already out there.

EricDean
EricDean

Thanks Amir. It’s nice to hear that’s appreciated.

Amir Kakhsaz
Amir Kakhsaz

And he’s got a 911SC like me so that automatically makes him one of the coolest cats ever.

Kurt Uzbay
Kurt Uzbay

Congrats Eric- excellent looking GT40..
I own a wide-body Gulf livery, right- hand drive- right-hand-shift- Superformance GT40… love it.. pict attached..
Your livery is really cool- cross between Essex Wire and Champion spark plug themes.. also love the Holman -Moody air filter and valve covers..
do you know what gear ratios your G50 trans-axle has ?
Thx- Kurt

Kurt Uzbay
Kurt Uzbay

Thx Eric- I have an ’05 Ford GT too, and its like a Lincoln Town car compared to the delicious, brute, raw-ness of my GT40.. I’m guessing your RCR is similar in that raw way…
Thx for the gearing- We’re pretty comparable 1-5, but my RBT ZF trans has a 4.22 R&P . and its just screaming at low rpms/low mph.. a 3.78 may be a better choice; and a good compromise between the track. and the street…
i also race scca spec miata..
Kurt

EricDean
EricDean

Thanks Kurt. Your car is exceptional!

It’s a G50/01
Gear ratios:
1st gear: 3.50
2nd gear: 2.059
3rd gear: 1.409
4th gear: 1.125
5th gear: 0.889
Ring and pinion: 3.44

geelongvic
geelongvic

Delightful, and it’s grand that its used on the road–driven, not in a garage!

wpDiscuz